Quick answer
Published 2026 guides put a café fit-out at roughly $1,500 to $3,000 per square metre for a basic refit, $3,000 to $5,000 for a standard build with a working kitchen, and $5,000 or more for large or heavily serviced sites. The swing items are kitchen exhaust, gas, plumbing and power, not the timber and paint. Treat these as sanity checks and price your own site from fixed quotes.
Key points
- Per-square-metre figures are vendor and builder estimates, not official statistics, and they disagree: use them to test a quote, never to replace one.
- A published 2026 guide puts exhaust and ventilation at $8,000 to $40,000 or more, and gas and plumbing at $5,000 to $25,000.
- The smaller the café, the higher the cost per square metre, because the kitchen and services are fixed costs spread over fewer metres.
- Like-for-like fit-outs are reported to be 5 to 10% dearer than a year ago, and imported equipment can carry 8 to 16 week lead times.
- GST on the build is paid up front and claimed back later through your BAS, so it needs a place in your cash plan.
A café fit-out in Australia typically runs from about $1,500 to $3,000 per square metre for a basic refit, $3,000 to $5,000 for a standard build with a working kitchen, and $5,000 or more where the site is large or heavily serviced. Those are published 2026 estimates, not official statistics. Use them to test a builder’s quote, then price your own site from fixed-price quotes.
The reason one number never fits is that a fit-out isn’t one product. A 60 square metre espresso bar that inherits a working kitchen and a 60 square metre café that needs a new canopy, gas line and grease trap share a floor area and almost nothing else. This guide breaks the per-metre figure into the parts that move it, so you can see where your own number will land.
What do published café fit-out costs per square metre actually say?
Published figures cluster between $1,500 and $4,000 per square metre for cafés, but they come from suppliers and cost-comparison sites, and they don’t agree with each other. Treat them as a range to test against, not a price list.
Here’s what the 2026 sources say, and who is saying it:
| Source (2026) | Venue | What it says |
|---|---|---|
| ResDiary | Café, about 40 to 80 sqm | Typically $1,500 to $4,000 per sqm, light refits at the low end, full commercial kitchens with premium finishes at the top |
| Hospitality Hub | Small café up to 80 sqm | $100,000 to $350,000 in total |
| Hospitality Hub | Mid-size restaurant or bar, 80 to 250 sqm | $350,000 to $800,000 in total, about $3,000 to $5,000 per sqm |
| Hospitality Hub | Large or specialised, 250 sqm and over | $800,000 to $1,500,000 or more, about $5,000 to $8,000 or more per sqm |
Notice the spread: the same article quotes a small café at up to $350,000 and a basic refit at $1,500 per square metre, which is a 60 square metre job at $90,000. The difference between those two is the work being done, not the size of the room.
What’s the difference between a refit, a standard build and a full build?
Your starting point decides the rate far more than your finishes do. A refit changes what customers see, a standard build adds a working kitchen, and a full build starts from a bare shell and creates everything behind the walls too.
- Light refit ($1,500 to $3,000 per sqm in the Hospitality Hub guide). The kitchen, canopy and services already work. You’re changing the counter, seating, lighting, flooring and paint. Think of taking over a former café and making it yours.
- Standard build ($3,000 to $5,000). A working kitchen with new equipment, a connected canopy, plumbing changes and electrical work for a new layout, plus the front-of-house fit-out.
- Large or heavily serviced ($5,000 and above). Bare shell, long duct runs, three-phase upgrades, multiple wet areas, or a space where services have to be threaded through an existing building.
Which of these you’re really facing is something to find out before you sign the lease. Our retail lease checklist covers what to ask the landlord about existing services, and the fit-out period you may be able to negotiate.
Why does a small café cost more per square metre?
Because a café’s most expensive parts don’t scale with its size. Every venue needs a coffee setup, refrigeration, a dishwasher, a handwash basin, compliant exhaust if you cook, and a counter. A 40 square metre espresso bar and an 80 square metre café need much of the same kit, so the smaller room carries a higher cost per metre.
Practically, this means:
- Don’t scale a quote down by area. A builder’s $2,000 per sqm for an 80 square metre café doesn’t become $80,000 at 40 square metres. The fixed items stay.
- Don’t scale a big-venue benchmark down to a small café. The reverse is just as misleading. A 150 square metre restaurant with a full line of cooking and a bar isn’t a template for a 50 square metre takeaway.
- Look for the fixed items first. Ask what the quote includes for exhaust, gas, hydraulics and power, then see what’s left for the dining room.
Which trades swing the budget most?
Exhaust, gas, plumbing and power. These sit behind the walls, they’re driven by regulation and the building, and they vary enormously from site to site. The Hospitality Hub guide puts exhaust and ventilation at $8,000 to $40,000 or more, and gas and plumbing at $5,000 to $25,000.
Those are wide ranges for a reason:
- Exhaust. A café doing toasties and a café with a fryer and a flat-top are different animals. Councils apply AS 1668.2 and expect mechanical exhaust once cooking appliances pass certain thresholds, and the duct route to the roof can cost more than the hood.
- Gas. A new meter or a larger supply can be a utility job with its own lead time.
- Plumbing and drainage. A grease trap, floor waste, new hot water system and a hand basin in the right place add up quickly. Our guide to grease traps and trade waste explains when you need one and what approval involves.
- Power. A combi oven, a dishwasher and a two-group machine can need more than a former shop’s switchboard offers.
- Kitchen equipment. The same guide puts cooking equipment at $15,000 to $80,000 or more, and refrigeration at $10,000 to $60,000 or more, and says kitchen equipment can be 40 to 60% of a typical fit-out budget. If you’re weighing used against new, our used commercial kitchen equipment checklist is worth reading first.
The building code is also in motion. The Australian Building Codes Board published the National Construction Code 2025, but states and territories are adopting it on different dates, and some have deferred it into 2027. Ask your certifier which edition applies to your job, because it can change insulation, ventilation and exit requirements.
What do 2026 price pressures add to a quote?
Expect a like-for-like fit-out to cost more than it did a year ago, and expect equipment lead times to move your opening date. Hospitality Hub’s 2026 guide reports like-for-like fit-outs as roughly 5 to 10% dearer than a year earlier, construction costs forecast to rise about 4% across 2026, and imported steel and aluminium up 5 to 10%.
Two practical consequences:
- A quote has a shelf life. If your builder’s price is three months old by the time you sign, ask whether it is still valid, and what’s allowed for price movement on stainless and aluminium items.
- Imported equipment can have 8 to 16 week lead times according to the same source. Order long-lead items such as the coffee machine and cool room early, because rent runs while you wait. Our guide to commercial coffee machine costs covers what to budget around the machine itself.
Treat these as one source’s figures. They fit what many owners report, but check them against your own suppliers’ written lead times.
How do you test a builder’s quote against the per-metre figures?
Divide the quote by the floor area, then compare it with the band that matches your starting point. If you land far below it, something is probably missing; if you land far above, ask what’s driving it. Then read the inclusions line by line.
A short method:
- Get at least two fixed-price quotes on the same brief, with the same drawings and the same inclusions list.
- Divide each total by the floor area and place it in the right band: refit, standard or full build.
- Check what’s excluded. Exhaust, gas, hydraulics, signage, furniture, kitchen equipment, council fees, design and engineering are often listed separately or left out.
- Add what the builder doesn’t carry: design and approvals, equipment, furniture and smallwares, bond, rent before trading, pre-opening wages and opening stock.
- Add GST timing. You pay it on the invoices, then claim it back through your BAS.
Our fit-out cost estimator does steps 4 and 5 for you: put in the builder’s quote and it adds the costs that most often catch new venues out. If you’d rather talk the numbers through with a person, you can check where your fit-out budget stands with a short enquiry that doesn’t touch your credit file.
What does the maths look like for a 60 sqm café and a 120 sqm restaurant?
Here is an illustrative example using the published bands, to show how the figures translate. Illustrative only: these are not quotes, and your site will differ.
A 60 sqm café taking over a former café. At the refit band of $1,500 to $3,000 per square metre, the building and fit-out work comes to roughly $90,000 to $180,000. That leaves out the machine and grinders if the previous tenant took them, the dishwasher if it fails, furniture, the bond, rent during the works, and a buffer.
A 120 sqm restaurant on a bare shell. At the standard-build band of $3,000 to $5,000 per square metre, the figure is roughly $360,000 to $600,000, which sits inside the $350,000 to $800,000 range the same guide gives for a mid-size restaurant or bar. A full canopy, new gas supply and grease trap can push it above that. Our guide to opening a restaurant puts those items in the order they usually have to happen.
An 80 sqm boutique. We haven’t found a reliable published per-square-metre benchmark for independent shops, and a boutique has no exhaust or grease trap to drive its costs. Joinery, lighting, flooring and shopfront work dominate, so quotes from two shopfitters are your best guide. Our page on shop fit-out finance covers how those costs are usually funded.
Opening a café from scratch rather than taking one over? Our guide to opening a café walks through the permits and timeline around the build.
How is a fit-out usually paid for?
In stages, as the work progresses, and usually from more than one source: your own cash, the landlord’s contribution if you negotiated one, supplier terms on equipment, and finance for the gap. The cash leaves your account before the venue earns anything, which is why the gap is the number to nail down.
For a venue that hasn’t opened, there’s no turnover for an unsecured lender to size a loan on, so property-secured business loans from $20,000 to $5,000,000 are the more usual route. For a café that has been trading and can show bank statements, unsecured and cash-flow options, typically $20,000 to $500,000, can fund a refresh or a new kitchen. Our page on restaurant fit-out finance goes into how progress payments line up with funding.
On the tax side, the ATO’s $20,000 instant asset write-off applies per asset for eligible small businesses, which can matter for individual equipment items. Whether any part of your fit-out qualifies is a question for your accountant.
Know your number before the builder asks for a deposit
Most owners don’t get into trouble because a builder overcharged them. They get into trouble because the quote covered the build, and nobody had added the canopy, the equipment, the rent during the works and the weeks of trading before the doors paid for themselves. If you’ve got a quote in hand and a gap in the budget, that’s the moment to talk to us.
Here’s how it works. The enquiry takes about 60 seconds, and asking what’s possible doesn’t touch your credit file. We don’t send your details to a pile of lenders, so your phone won’t be ringing with strangers. A real person who understands venues reads your situation and calls you. Please fill the form in accurately, especially the total cost, what you can put in yourself and any property you could offer as security, so we can match the right option first time.
Ready when you are
Check your options in about 60 seconds
A few quick questions. Asking won't touch your credit file, your details aren't sent to a pile of lenders, and a real person reads every enquiry.
Frequently asked questions
How much does a café fit-out cost per square metre in Australia?
Published 2026 guides from fit-out suppliers and cost-comparison sites put it at roughly $1,500 to $4,000 per square metre for a typical café, with a basic refit at the lower end and a full commercial kitchen with premium finishes at the top. Large or heavily serviced sites can pass $5,000. These are estimates, so get fixed-price quotes on the same brief.
Why does a small café cost more per square metre than a big one?
Because some costs don't shrink with the floor area. Every café needs a counter, a coffee setup, a handwash basin, a dishwasher, refrigeration and compliant services, whether it is 40 square metres or 80. Spread over fewer metres, the same kitchen makes the per-square-metre rate look higher.
What is the biggest cost in a café fit-out?
Usually the kitchen and the services that support it. One 2026 buying guide puts kitchen equipment at 40 to 60% of a typical hospitality fit-out budget, with exhaust and ventilation at $8,000 to $40,000 or more. Joinery and finishes are visible, but extraction, gas, plumbing and power are where budgets are most often blown.
Can I claim GST back on a café fit-out?
If you're registered for GST and the fit-out is for your taxable business, you can generally claim GST credits on it through your BAS. The catch is timing: you pay the GST to the builder and suppliers first, then recover it after you lodge. Ask your accountant how the timing falls for your reporting period.
Does the instant asset write-off cover a fit-out?
Partly. The ATO's $20,000 instant asset write-off applies per asset for eligible small businesses, so individual items such as a dishwasher or a coffee grinder can qualify. Building works and structural changes generally don't work that way. Your accountant can split the invoice between equipment and building works.
How much contingency should I add to a fit-out quote?
It depends on the building and the quality of the quotes. A clean shell with a fixed-price contract carries less risk than an old venue where hidden drains, walls and electrics can surprise you. Many owners hold back a contingency allowance on top of the quote and keep it separate from their opening cash.
Can I finance a café fit-out without property?
Sometimes. A café that has been trading and can show bank statements may access unsecured or cash-flow options, typically $20,000 to $500,000. A café that hasn't opened yet usually has no turnover to size a loan on, so property security is more common, from $20,000 to $5,000,000. Each case is looked at individually.